Mooring lines: avoiding the dangers of creep

When the fourth edition of the Mooring Equipment Guidelines known as MEG4 was released in 2018 by the Oil Companies International Marine Forum, it set higher safety standards. The OCIMF recognised that lines had to rise to the challenge of faster port turnarounds, ever-larger vessels and widely varying conditions including the effect of extreme heat and cold on lines. 

As MEG4 points out, “mooring is one of the most complex and dangerous operations for ship and terminal crew. If something goes wrong, the consequences can be severe.” 

Avient which was closely involved in the development of the guidelines, welcomes them. Their Dyneema® SK78 fiber is purpose-built to meet head-on the challenges of this new era in mooring. 

MEG4 requires a much broader approach to the design of mooring rope than previously. As well as breaking load, rope diameter and other characteristics obvious at purchase, the guidelines encompassed a whole new range of parameters such as angled endurance, material breaking force at high temperatures and axial compression resistance. 

In short, lifetime performance. 

Mooring ropes should be made to last and provide comfort to ship operators, not least the crew. The challenge is, of course, that no ship, port, or crew is the same. So, in partnership with manufacturers of premium mooring ropes, Avient has long been working towards use-specific lines. That’s why mooring ropes made with Dyneema® SK78 fiber are designed to handle the endless stresses and strains imposed during mooring operations that result in fatigue, abrasion, creep, and temperature. Any one of these “FACTs” can lead to failures. 

The mooring experts at Dyneema® have put together a video series about the FACTs to consider when selecting mooring lines. Their Creep video below explains how and why they have engineered Dyneema® SK78 fiber so that it offers at least three times the resistance to creep compared to generic alternatives. 

Want more information? Want more information? Connect with one of Dyneema’s experts by clicking this link Connect to an expert (dsm.com) or scan the QR code.