Implementation of the Ballast Water Convention was advanced by MEPC 59 with two more states, Albania and Antigua & Barbuda, ratifying. This brings the tally up to 18 states representing 15.27 per cent of the world's fleet – 30 states and 35 per cent are required for entry into force.
It was agreed that there are now enough ballast water treatment systems approved and on the market for full implementation of the convention, and the possibility of delaying the entry into force date for vessels built in 2010 with a ballast capacity of less than 5,000m3 was not considered necessary. IMO approval, paving the way for type approval, was granted at MEPC 59 to CleanBallast by RWO, NK-03 from Nutech 03 of the US and NK of Korea, Clearballast by Hitachi Plant Technologies and Mitsubishi Heavy Industries, Hamworthy Greenship and EcoBallast from Hyundai Heavy Industries.
MEPC 59 adopted amendments to Marpol Annex I for the prevention of marine pollution during ship-to-ship (STS) oil transfers that are expected to enter into force on 1 January 2010 for oil tankers of 150gt and above. These vessels will be required to carry an approved STS plan and to notify relevant coastal states not less than 48 hours in advance of STS operations (bunkering operations are excluded).
Active phase-in of MEPC 107(49) compliant, emulsion-breaking oily water separators (OWS) on existing ships was considered and rejected at MEPC 59, so the existing requirement for only newbuildings and total replacements to be in compliance remains unchanged.
Alfa Laval questions the adequacy of the type testing performed for MEPC 107(49) systems since it believes this does not call for conditions simulating rough seas or the time and input that would lead to clogged filters. The company believes that the centrifugal separation technology that its PureBilge technique employs is more efficient than others because of its XLrator laminar flow inlet device.
The XLrator gently accelerates bilge water into the separator bowl with a minimum of shearing and foaming and this prevents the formation of further emulsions. The system does not need chemicals, adsorption filters or membranes and is said to be resistant to solid contaminants such as soot and rust.
The Society of Naval Architects & Marine Engineers submitted an OWS troubleshooting guide to MEPC 59 that was accepted for publication as an MEPC circular. It describes contaminant identification techniques, troubleshooting options, recommendations for preventative and corrective measures and background theory. TST
Events
© 2026 Riviera Maritime Media Ltd.