ABS advocates a compartmentalised approach to hull inspection and maintenance to increase survey effectiveness
ABS advocates a compartmentalised approach to hull inspection and maintenance to increase survey effectiveness
Several major classification societies now offer some form of hull inspection system to be implemented by the owner’s representative. Adoption of one of these schemes may help an operator to work with the class society to provide more focused and effective surveys. Some societies have, however, not only developed a comprehensive, ship specific, inspection programme for owners, but offer an optional notation based on comprehensive guidelines, appropriate training for crew and implementation of the associated software.
The approach taken by ABS in its Hull Inspection and Maintenance Programme (HIMP) concept is to divide each compartment into zones. Each cargo space and ballast tank is typically divided into 14 zones. The forepeak, aft peak and other miscellaneous tanks and spaces are subdivided into between two and six zones, depending on complexity. Critical structural areas (if any) are identified for a compartment/zone based on engineering analysis and in-service experience.
The inspection criteria are graded with a rating from 0 to 6 and are colour coded to provide an easily visible traffic light status – red (5 to 6), yellow (3 to 4), green (0 to 2). A rating is assigned to each zone for each criterion (categorisation table pictured). The scores are then added for each zone and rolled up to get a normalised score for the compartment.
Six inspection criteria are used for the rating under the ABS programme: the condition of the coatings; the extent of general corrosion; the presence of pitting and grooving; deformations; fractures; and general cleanliness, each of which is then rated on the 0-6 scale.
The coating condition is as defined by IMO/IACS reference documents. General corrosion appears as non-protective rust which can uniformly occur on tank internal surfaces that are uncoated, or where a coating has totally deteriorated.
Localised corrosion (pitting and grooving) occurs on bottom plating and other horizontal surfaces, producing deep and relatively small diameter pits that can lead to penetration of the steel member in isolated random places in the tank. Grooving is a localised, linear corrosion which occurs at structural intersections in welds or heat affected zones. This corrosion can also occur on vertical members and flush sides of bulkheads in way of flexing.
Deformation is caused by impact loads, contact or overloading. Deformation may be local (deformation of panel or stiffener) or global (deformation of a beam, frame, girder or floor including associated plating). Fractures are categorised, based on the location of the fracture and that local structure’s contribution to overall hull integrity. Finally, the cleanliness criterion is used to evaluate elements such as the amount of sediment remaining in a tank; the condition of the anodes; the condition of the permanent means of access and of piping and similar elements.
‘Red’ for any inspection criteria indicates a structural deficiency and the inspector should create an anomaly report. ‘Yellow’ indicates a progression towards an anomalous condition and serves as an early warning and, at the discretion of the inspector/superintendent, may be addressed at the next repair/drydock schedule. Identification of anomalies can assist the operator in managing and controlling the repair specifications and drydock planning.
“Much of the above is basic to any comprehensive maintenance programme,” says Chris Serratella, director of operational safety and evaluation at ABS. “What takes the inspection process to the next level is the ability to direct the inspector – who may be one of the ship’s officers or the company’s superintendent – to examine structurally critical areas. The identification of these areas is based not just on in-service experience but the ship-specific engineering analyses, including finite element analysis, that are undertaken by ABS in establishing the inspection scheme for each ship entered into the programme.”
The results are divided into ‘typical’ critical areas and ‘specific’ critical areas based on a criticality matrix. Typical critical areas are generic to the type of ship and are to be inspected randomly by subjecting at least 10 to 25 per cent of the area for close-up visual inspection.
Specific critical areas are defined by the hull structural analysis that identifies those areas that have a particularly high risk of failure. Specific critical areas may also be identified where the structure is of unusual design or based on a novel concept.
“All areas which have been identified as high risk specific to that particular ship design would require a 100 per cent close visual inspection every time the tank or compartment is entered,” says Mr Serratella. “The likelihood of failure is evaluated on the basis of a calculated fatigue life or strength or buckling unity check; and the consequence of failure has been determined based on the qualitative judgment for the detail in question.”
Mr Serratella also stresses the value of implementing a standardised fleetwide approach to collecting and analysing the inspection data. “The scoring system allows for the comparison of the condition of tanks on a specific vessel and also the comparison of the condition of those tanks against other vessels in a fleet. The inspection data for a large fleet of similar vessels should help the owner to identify trends so as to forecast better repair requirements and manage resources,” he says.
Proponents of these more advanced inspection schemes maintain that a more formalised method for hull inspection puts an owner on the path towards a more rationalised approach to structural integrity management. The concept can be applied by a small fleet operator with simple spreadsheets.
For an operator with a large fleet, a sophisticated ‘dashboard’ application encourages monitoring the condition of the fleet and the identification of systemic problems. In either case, the owner can expect to have better control over the ongoing maintenance and repair of his vessels and the attendant costs. TST
Events
© 2026 Riviera Maritime Media Ltd.