Recall notice issued for Saver CF EBBDs manufactured between April 2025 and September 2025, noting insufficient air flow
Draeger Safety UK Ltd has issued a safety recall on certain Saver CF emergency escape breathing devices, noting that they “may supply an insufficient volume of air upon activation.”
In its notice, the manufacturer says that reduced airflow can increase CO2 build-up within the device’s hood or create negative pressure in the hood, making it more likely that contaminants enter the hood.
Affected models have serial numbers from BSUD-0001 to BSUK-999 and were manufactured between April 2025 and September 2025.
Draeger Safety UK recommends immediately removing EEBDs that are within the serial number range from service where possible. “If you have passed on or sold the product to a third party, please forward this information to them. Your local Dräger sales and service organization will arrange new replacement units,” said the Draeger Safety UK notice.
“To best facilitate these replacements, please communicate any urgent requirements to your local Dräger entity, and replacements will be prioritized accordingly.”
Class society ABS recommends that vessel and offshore facility operators verify whether any affected Draeger Saver CF EEBDs are installed on board and take appropriate corrective action in accordance with the manufacturer’s instructions. ABS posted the recall notice.
Emergency escape breathing devices (EEBDs) are required under SOLAS regulations on offshore rigs and ships, where there is a risk of accidental toxic gas and chemical releases, fire, or smoke conditions.
The Dräger Save CF 15, for example, can be wall-mounted or worn directly by a crew member or other personnel for quick activation. Once activated, the apparatus provides a constant flow of breathable air for 15 minutes, allowing personnel to safely exit and escape a hazardous machinery space or accommodation area.
Events
© 2026 Riviera Maritime Media Ltd.