A ferry-to-flotel conversion shows that zero-emission hotel loads are possible, offering cruise and ferry operators an alternative to oil-fired boilers and fossil fuel-dependent chillers
An extensive retrofit of a European cruise ferry into a state-of-the-art floating accommodation unit, off the coast of Canada and housing 700 construction project workers, is providing a scalable roadmap to cutting the carbon footprint associated with hotel loads.
While the interior arrangement is impressive – with all 700 single cabins equipped with desks and TVs, alongside a gym space – the real innovation can be found below-deck, where six electric heat pumps draw energy directly from the sea. As such, these specially developed pumps eliminate reliance on oil-fired boilers, conventional chillers and effective but scarce shoreside battery-charging stations.
Initially, marine repair specialist SRC Group considered air-source systems for the flotel. This option was ruled out, however, in part because the only practical space for these bulky units would have been on the upper decks.
“Locating the air-source systems in that vessel section would have eaten into valuable passenger space and altered the ship’s profile. Instead, our engineers installed six seawater-sourcing pumps on the vessel’s former car deck, in proximity to the engine room’s existing pipework,” said the company’s innovation manager, Alex Vainokivi.
The combined heat pumps, custom-built by SRC Group partner Energy Transfer, provide the flotel with 3,000 kW of thermal power. “The pumps extract energy from 7°C seawater and use it to provide onboard heating at up to 60°C in winter conditions,” explained Mr Vainokivi. “Our heat pumps feature inverter-controlled Bitzer screw compressors and fully brazed plate heat exchangers, all managed by a DUC automation system that controls the flow temperature based on outside conditions.”
The system relies on corrosion-resistant, titanium heat exchangers to circulate a glycol-water loop. In winter, it draws natural warmth from the seawater to heat the ship; in summer, it reverses the process to dump indoor heat back into the ocean for the AC. The result is flexible temperature control all year round and across various climates.
Since the converted ferry project was completed, SRC Group has officially partnered with Energy Transfer and is now offering these fully electric, modular heat pump solutions for both newbuilds and retrofits.
For cruise and ferry operators looking to substantially reduce their carbon footprints, the heat pump system’s cost and efficiency benefits could prove just as appealing as its environmental advantages.
“Under favourable conditions, the pumps deliver 11 kW of combined thermal output for every 1 kW of electrical input,” said Mr Vainokivi. “With a thermal capacity range spanning 200 kW to at least 3 MW, the technology provides a realistic path to zero-emission hotel loads.”
As a result of this high-efficiency ratio, shipowners could realise a return on investment within just two years, SRC Group calculates. The ability to scale the heat pumps, along with plans to surpass the current 3 MW upper limit, gives even the largest behemoths in the cruise and ferry segments the opportunity to radically cut their emissions without exorbitant investment in alternative fuels, and without compromising the full ‘onboard experience’ passengers have come to expect.
Events
© 2026 Riviera Maritime Media Ltd.