A new technical paper argues that the value of the first international standard for in-water hull cleaning will depend on a shift in mindset
Ports and regulators now have a framework for assessing cleaning operations. Shipowners, the authors say, should use it to move from reactive cleaning to proactive biofouling management.
The paper, ISO 6319 and the Shift from Reactive Hull Cleaning to Proactive Biofouling Management, is written by Jotun specialists Anders W. B. Skilbred, Helle Ertsås Vines and Petter Korslund. It argues that cleaning a hull before heavy fouling develops can reduce fuel use, emissions, coating damage and the risk of spreading invasive species.
Mr Korslund will develop the biosecurity dimension of that argument at Riviera Maritime Media’s forthcoming webinar, Biosecurity at the Border: NIS Risk, Port State Control, and the Shipowner’s Duty of Care, on 12 November. The webinar is part of Riviera’s wider Biofouling Management Workshop programme, which also includes a London workshop on 22 January, ahead of PPR 14.
From cleaning to management
The paper’s central argument is that hull cleaning should not be treated as an isolated port-side activity. It should form part of a continuous performance system.
Biofouling begins as a microbial film. It can develop into slime, barnacles and tubeworms, adding drag as it grows. That drag increases fuel consumption and greenhouse gas emissions.
Jotun’s researchers argue that reactive cleaning, carried out once fouling has become established, is inherently more disruptive. It involves greater biomass, stronger cleaning forces and a higher risk of damage to antifouling coatings.
Proactive cleaning removes early-stage fouling before macrofouling develops. The authors present this as a lower-risk, lower-cost approach that supports a continuously clean hull.
Robotic in-water cleaning is presented as one practical expression of that approach. By combining monitoring, inspection and cleaning, such systems aim to maintain hull condition rather than simply respond to deterioration.
The standard’s role
ISO 6319:2026, published in March, provides a common framework for planning, conducting, documenting and reporting in-water cleaning. It covers hull and niche areas, fouling from biofilm to macrofouling, and cleaning carried out with or without capture.
For Jotun’s authors, the standard’s importance lies in turning a cleaning event into a traceable and auditable operation. That gives owners, ports, charterers and class societies a shared basis for assessing what was done, when, and with what environmental safeguards.
The paper argues that this documentation can support fuel-efficiency claims when combined with ISO 19030 performance monitoring. Cleaning records can be linked to measurable changes in hull performance, rather than relying on broad assertions about fuel savings.
Why fouling matters
The economic case is direct. Fuel can account for 50 to 60% of a ship’s operating costs, depending on vessel type and fuel prices.
The paper cites IMO figures showing that slime just 0.5 mm thick across half a hull can raise a ship’s greenhouse gas emissions by 20 to 25%. A light layer of barnacles or tubeworms can raise emissions by up to 55% on an average container ship.
Fouling also creates a pathway for invasive aquatic species to travel between ports. For voyages linked to the EU, carbon pricing now adds a financial cost to a dirty hull as well as an environmental one.
Who benefits?
For shipowners and operators, the standard offers clarity on the documentation that ports, charterers and class societies may expect. It also creates a basis for treating hull cleaning as part of a documented performance system, with fuel savings, lower emissions and reduced carbon-pricing exposure as potential outcomes.
For owners and charterers, a shared factual record could ease performance discussions. The party investing in hull condition and the party paying for fuel would have a common evidential baseline.
For ports and regulators, standardised information should make cleaning requests easier to assess. It can help distinguish low-risk cleaning of early-stage fouling from higher-risk removal of mature macrofouling.
The standard leaves thresholds and performance criteria with local authorities and ports. But it gives owners and service providers one documentation package that can travel from port to port.
For coating and cleaning technology developers, consistent records could show how cleaning affects coating condition, time to refouling and water quality. That should move the industry towards evidence-based decisions, rather than broad claims.
For biosecurity, preventing mature macrofouling from building up reduces the risk of carrying organisms between regions. Documented early cleaning also gives authorities better evidence that a vessel is managing that risk.
Limits remain
Jotun is clear that ISO 6319 does not close every gap.
More work is needed to link fouling ratings to actual invasive-species risk. Species identification and water-quality data during cleaning also need improvement. Niche areas remain harder to inspect and clean than open hull surfaces.
The standard’s value will also depend on adoption. Ports must choose to use it, and the records produced must be credible.
The wider debate
The paper arrives amid a broader industry discussion on how biofouling policy should develop. Riviera has already examined the regulatory and commercial tensions surrounding ISO 6319, including the absence of action thresholds, verification arrangements and enforcement consequences.
That debate is expected to intensify ahead of PPR 14, which meets at IMO headquarters in London from 25 to 29 January 2027. The committee will begin to address questions the standard deliberately leaves open: when a port should permit cleaning; what evidence it should require; and who bears the cost of any gap between policy and operational capacity.
Events
© 2026 Riviera Maritime Media Ltd.