US tugboat owners, from New York to New Orleans, are investing in their fleets as larger ships visit the nation’s harbours and terminals are expanded
Tug owners headquartered in the northeast US are modernising and expanding their fleets in response to port investment and the arrival of ultra-large container ships and the opening of new LNG export terminals.
The expansion of terminals has enabled container ships of more than 15,000 TEU to dock in US harbours, adding to the capability and power requirements of port tugs and demanding increased co-ordination among tug masters, pilots and line handlers.
Rising global demand for LNG and increasing US gas resources is leading to the construction of new export terminals and more gas carriers requiring tug assistance. New port tugs are built to ABS class and have two diesel engines that are compliant with US Environmental Protection Agency (EPA) Tier 4 emissions standards.
McAllister Towing took delivery of its latest newbuild harbour tug in Q3 2026 to expand its towage services in US East Coast ports.
The New York-headquartered owner welcomed Mary McAllister after it was built by Washburn & Doughty Associates in Boothbay, Maine, as the sixth of a seven-tug series.
It has a bollard pull of 84 tonnes, resulting from two diesel four-stroke Caterpillar-manufactured Cat 3516E engines, connected to aftertreatment units for EPA Tier 4 compliance, driving two azimuth thrusters.
Mary McAllister is the 43rd tractor tug in the fleet, said McAllister Towing, joining recently built sister tugs, 2025-built Gerard McAllister and 2026-built Isabel McAllister.
“Mary McAllister as our latest high-tech, low-emission, firefighting and mission-critical tug,” said McAllister.
This ABS-classed tugboat has a FiFi1 firefighting system capable of propelling 12,000 gallons of water per minute through pumps and monitors.
McAllister Towing said the tugboat sailed initially to Baltimore to join Isabel McAllister on an assignment before heading to its new home in Port Everglades, Florida, “where it will be a dynamic force for years to come”.
This series of 28-m newbuild tugs has two Schottel azimuth Z-drives of type SRP 490 with fixed pitch propellers, two John Deere 4045 AFM85 generators, each developing 99 kW of electrical power, and a Markey DEPCF-52 class-II escort winch with 56 kW of power and render/recover capabilities for 243 m of 10-inch diameter line.
McAllister said its next newbuild, Cathy McAllister, is scheduled to be delivered in mid-2027.
Moran Towing named its latest newbuild tugboat, J Themistoclis Moran, in May 2026 in Port Arthur, Texas, after its construction by Master Boat Builders in Coden, Alabama, to Robert Allan’s RApport 2800 design.
This 395-gt, 28-m vessel has a beam of 12 m and two Cat 3512E diesel engines, compliant with EPA Tier 4 standards, driving two Kongsberg US 2055 azimuth Z drives, with a fixed-pitch propeller.
It is the fourth vessel in its class, following delivery of William E Moran, Newt Moran, and Thomas C Moran in the past two years as part of Moran’s ongoing fleet modernisation programme.
Master Boat Builders also delivered tugboat Jane to Moran in Q2 2026, and it then became part of the Gulf LNG Tugs fleet operating in Texas.

Great Lakes Towing returned to its sister company, Great Lakes Shipyard, to build two more ice-class harbour tugs to support vessels in the major lakes of North America.
Great Lakes Shipyard will build, outfit, and commission two vessels at its Cleveland, Ohio, facilities. These will be built to a Damen design, with hulls able to manage ice in winter months.
These contracts are part of the owner’s ongoing fleet renewal and expansion programme that has already seen 10 US-built new Damen tugs enter service in the past decade.
Construction is expected to begin later this year; hull 11 is scheduled to be delivered in Q4 2027 and hull 12 in Q1 2028.
Great Lakes Towing named its 10th newbuild, Puerto Rico, at a ceremony in Cleveland in Q2 2026.
All of these tugs were built to Damen’s Stan Tug 1907 ICE design for ship assistance, towing, berthing, and ice breaking.
At 19.5 m, with a beam of 7.3 m and hull depth of 3.3 m, each tug is powered by two Rolls-Royce Power Systems mtu 4000 series V8 diesel engines, rated for US EPA Tier 4 requirements, with a bollard pull of more than 30 tonnes.
Great Lakes Towing operates in almost 50 US ports and in Windsor and Port Colborne in Ontario, Canada, serving lakes Erie, Huron, Michigan and Superior.
West Coast-bound
In Florida, Eastern Shipbuilding Group (ESG) has launched three of four 26-m escort tugs it is building for Seattle, Washington-headquartered Saltchuk Marine.
These tugs are being built at ESG’s facilities in Allanton and Port St Joe for ship escort and towage across the US West Coast, Hawaii and Alaska, and they are being launched every four months, starting in in December 2025.
They are being built to Robert Allan’s RAmport 2600 design with a moulded beam of 13 m, a moulded depth of 4 m, a navigation draught of 6 m, a bollard pull of 86 tonnes, a top speed ahead of 12 knots and accommodation for eight crew members.
Their propulsion consists of two Caterpillar-manufactured Cat 3516E main diesel engines, each developing 2,610 kW at 1,800 rpm, compliant with EPA Tier 4 regulations, driving two Schottel rudderpropellers of type SRP 510. They will feature a Markey Machine single-drum, class II hawser winch, with 56 kW of type DEPGF-52.
Saltchuk has also partnered with Harbor Docking & Towing to form the Green Tug Towing (GTT) joint venture to provide towage, escort, and terminal support services at LNG export terminals.
GTT has ordered four new RApport 2800H-design escort tugs from C&C Marine & Repair in Belle Chasse, Louisiana, after winning a 20-year services contract to handle gas carriers from Woodside Energy. GTT will operate a tugboat facility in Lake Charles, Louisiana.
In September, Bay-Houston Towing welcomed the new ship-escort tugboat Barbara G to its fleet after its delivery by Master Boat Builders.
G&H Towing is operating this 30-m, 413-gt tugboat to provide ship-assist and escort operations along the Texas Gulf Coast. It was in Galveston and Houston during September, according to AIS data.
It was built to a RApport 3000 design with a beam of 13 m, a bollard pull of 90 tonnes, a top speed of 13 knots, and accommodation for six crew members.
“This vessel adds valuable capability to our operations and further strengthens our ability to provide safe, reliable service to vessels transiting some of the nation’s busiest ports,” said Bay-Houston Towing president, Philip Kuebler.
It has two high-speed, four-stroke Cat 3516 diesel engines with a combined power of 5,220 kW driving two azimuth thrusters and linked to exhaust aftertreatment units to comply with the EPA Tier 4 emissions rules.
Bay-Houston Towing owns 20 tractor tugboats, including Barbara G, and five twin-screw tugs for harbour and terminal operations.
It has four more tugs under construction for delivery in the next two years, including two of Z-Tech 30-85 design and two of RAstar 3200-W design, and all ordered from Sterling Shipyard.
Texas expansions
Suderman & Young Towing is introducing tugboat operations in harbours in Brownsville and Isabel, in Texas, as it extends its fleet of more than 20 tugboats and support services. Sterling Shipyard and Master Boat Builders are building EPA Tier 4-compliant tugs for the owner.
In Q3 2026, Master Boat Builders launched Titan, the third H500 tug of a series of escort tugs it is building for Suderman & Young to ABS class and to Robert Allan Ltd’s RApport 3000 design. Another 30-m H500 tug, Saturn, was delivered to the owner in Q2 2026.
Each tug has accommodation for six crew members, a beam of 13 m, a bollard pull of more than 90 tonnes, a top speed of 13 knots, a FiFi1 firefighting system, and tankage for more than 44,300 gallons of fuel oil.
Propulsion consists of two four-stroke, Tier 4-compliant diesel engines with a combined power of 5,220 kW, driving two Steerprop azimuth thrusters. Suderman & Young describes these newbuild tractor tugs as Z-Tech 30-85 series vessels that are similar to the 2024-built Artemis.
The owner also has two 32-m tugs being built by Sterling Shipyard to Robert Allan’s RAstar 3200-W design and with 6,260 kW of installed power for delivery in 2027.
All these tugs will have four-stroke, high-speed diesel engines connected to selective catalytic reduction units to lower NOx from their exhaust, and Tier 4 compliance.
New Orleans additions
EN Bisso & Son has added two 2026-built ABS-class harbour tugs to its fleet to support maritime operations in expanding Gulf LNG export terminals.
The New Orleans-headquartered owner has welcomed Titan and Marauder after their construction by Master Boat Builders for investment group Maritime Partners.
They are on long-term charter from Maritime Partners, which has built them as part of an eight-tugboat series, starting in August.
Maritime Partners said it has invested nearly US$1Bn in new vessel construction, including towboats and tugs, at 12 US shipyards, since it was founded in 2015. Its fleet of around 1,900 vessels is deployed by charterers and operating subsidiaries throughout US coastal waters, inland waterways and the Great Lakes.
Crescent Towing has ordered four Z-drive tugboats, with 4,475 kW of power, from Blakeley BoatWorks, with deliveries scheduled for 2027 to 2029 to operate in the ports of New Orleans, Mobile and Savannah.
Gas carrier support
Gulf LNG Tugs, a joint venture between Suderman & Young, Bay-Houston Towing and Moran Towing, is also expanding its fleet in preparation for the opening of new gas export terminals along the US Gulf Coast.
In July, Gulf LNG Tugs took delivery of Laguna Gulf after its construction by Sterling Shipyard to Robert Allan’s Z-Tech 30-80 design.
This 30-m, ABS-classed tractor tug will be handling LNG carriers at NextDecade Corp’s Rio Grande LNG export project in the Port of Brownsville, Texas.
Laguna Gulf has a beam of 13 m, 5,220 kW of installed power, a FiFi1 firefighting system, and 80 tonnes of bollard pull.
Its propulsion consists of a pair of Schottel rudderpropellers of type SRP 510, with a 2.8 m fixed-pitch propeller, driven by two Caterpillar 3516E high-speed four-stroke main engines, rated at 2,610 kW at 1,800 rpm, and compliant with EPA Tier 4 emissions rules.
Deck machinery includes a Markey DEF-48A, Class III winch, with 75 kW and a dynamic constant-tension control system on the forward deck for ship escort operations.
In March, Gulf LNG Tugs of Port Arthur took delivery of an ABS-class, 28-m harbour tug, Jill, from Master Boat Builders after it was built to Robert Allan’s RApport 2800 design.
It has a beam of 12 m, a bollard pull of 85 tonnes, a FiFi1 firefighting system, and an escort-class ship-towing winch.
Connect with the international tug community at TUGTECHNOLOGY ‘27, the industry’s premier technical gathering, taking place in Rotterdam, the Netherlands, on 19-20 May 2027. Join tug owners, operators, builders, designers and technology providers for two days of industry insight, knowledge sharing and valuable networking. Find out more here.
Events
© 2026 Riviera Maritime Media Ltd.