The latest ASD Tug 1810 has a strengthened hull, winterisation package and IMO Tier III-compliant propulsion for deployment in northern European ports
Damen Shipyards has built an azimuth stern drive (ASD), ice-class tugboat with hybrid propulsion for handling vessels in small European harbours in cold climates.
DFF Hamster was completed in the Netherlands in November 2026 and was then made available for charter or sale, under the flag of St Vincent and the Grenadines, by Damen Marine Services.
This 18.3-m tug was built to Damen’s ASD 1810 design and Bureau Veritas ice class with a beam of 10.2 m, a draught of 4 m, a hull strengthened to navigate through first-year ice, a top speed of 11 knots, and a bollard pull of 31 tonnes ahead and 28 tonnes astern.
Its propulsion incorporates twin Caterpillar C32 TTA/C main engines, developing 1,940 kW at 1,800 rpm, connected to a Damen-manufactured exhaust treatment system, minimising NOx emissions and ensuring IMO Tier III compliance.
These drive two Schottel SRP 270 azimuth thrusters with a five-blade, fixed-pitch propeller of a diameter of 1,900 mm.
For auxiliary power, DFF Hamster has two shaft generators, each producing 50 ekW at 400 V and 50 Hz and one Caterpillar C4.4 diesel generator rated at 64.5 kW, 400 V and 50 Hz.
Damen said the vessel is a “compact harbour tug that is designed for high-manoeuvrability towing and vessel mooring.” It can be adapted for firefighting or oil pollution control operations.
It has a winterisation package that includes electrically heated wheelhouse windows, a central heating system with a fuel-oil fired boiler, heated battery locker, electric horn and CO2 locker and electric-powered jacket water heaters for the main engines and harbour genset.
The insulated and air-conditioned accommodation for four crew members includes two crew cabins for two persons, a pantry and a messroom on the lower main deck.
DFF Hamster has a hydraulically driven, split-drum towing winch located below the wheelhouse with 18 tonnes pull of up to 44 m/min and with a brake holding force of 114 tonnes.
Other deck machinery includes: an electrically driven capstan of 4.5 tonnes at 16 m/min on the aft deck; an electrically driven anchor winch; and a Mampaey towing hook with a safe load of 41 tonnes.
Its fendering includes a cylindrical rubber bow fender above a W-type block fender, and D-type rubber fendering on the sides and stern.
Tanks on DFF Hamster can hold almost 23 m3 of fuel oil, 4.4 m3 of fresh water, 3.2 m3 of sewage, 1.9 m3 of bilge water and 1.3 m3 of urea for the selective catalytic reduction unit.
For fuel handling, it has two CJC oil purifiers and a Triplex oil filter, plus two Azcue CA-40/1B service pumps rated up to 19.0 m3/hr and up to 2 bar, one portable and electrically driven bilge pump, and a keel cooling system.
There is also one DAB Euroinox fresh-water pressure set operating up to 3 bar, one Distrimex sewage pump of 1.3 bar and an internal CO2 firefighting system and a Damen Triton remote monitoring system.
In the wheelhouse there is one of each of: Furuno FAR 1518-BB radar; FE-800 echosounder; NX-700B Navtex; FA-170 automatic identification system and FMD-3200 ECDIS; plus Simrad AP-70 autopilot; GN70 satellite compass and HS80A positioning unit; two Cobham Sailor 7222 radio telephones on VHF; two Sailor SP3540 for emergency calls; a Reflecta 11 compass from Cassens & Plath; and a MaxSea TZ electronic chart system.
Connect with the international tug community at TUGTECHNOLOGY ‘27, the industry’s premier technical gathering, taking place in Rotterdam, the Netherlands, on 19-20 May 2027. Join tug owners, operators, builders, designers and technology providers for two days of industry insight, knowledge sharing and valuable networking. Find out more here.
Events
© 2026 Riviera Maritime Media Ltd.