Wärtsilä has introduced a new upgrade kit for those owners and operators wishing to operate their ships in slow steam mode, as a result of recent oil price hikes. They are suitable for RTA and RT-flex low-speed engines and enable major savings in fuel costs to be achieved. The kit allows Wärtsilä low-speed marine engines to be operated continuously at any power in the range of 20-100 per cent.
High bunker prices in recent months have put fuel efficiency high on the agenda of charterers and ship operators. Consequently, there is considerable interest in slow steaming; yet without modification, such as fitting this upgrade kit, operators run increased risks of engine fouling and excessive component temperatures when operating continuously below 50 per cent engine load.
The new kit aims to overcome such problems, enabling engines to operate continuously at powers down to 20 per cent of their full installed power. The modified engine is not permanently derated but can operate at any time up to its full installed power. Owing to the characteristic power versus speed relationship of propellers, this extended operational power range enables ships to be sailed at sea speeds down to 60 per cent of full speed.
The first upgrade kits were ordered in November by the German owner, Köpping Shipping, for two container carriers, each powered by a single eight-cylinder Wärtsilä RTA62U engine. The two vessels, Aglaia (to be renamed Lantau Ace) and Lantau Arrow, are 1,200 TEU fast feeder designs, built in 2001, with a maximum speed of around 22 knots at design draught with the main engine delivering 15,000kW at107 rev/min.
Jörg Köpping, the owner’s managing director, said "The slow-steaming upgrade kits will give these ships considerable flexibility to adapt to the present difficult market conditions, allowing great cost savings while slow steaming but retaining the capability for full speed whenever necessary."
The kit is available for all RTA and RT-flex engines with multiple turbochargers. For ships that must comply with IMO NOx emissions regulations, the restrictions imposed by the emissions limits will be evaluated in each case and a customised turnkey package can be offered. RTA and RT-flex engines can be safely operated continuously at loads above 50 per cent of the contracted maximum continuous rated (CMCR) power without any modifications.
The concept of the upgrade kit is to cut out a turbocharger when the engine is to be operated at low load.
This increases the scavenge air delivery at low load for better combustion and more optimum temperatures of engine components. The cut-out point depends upon the engine configuration.
Installation of the kit involves fitting shut-off valves in the exhaust duct before the turbocharger turbine and in the scavenge air duct after the compressor, together with a bypass line to keep the turbocharger rotor spinning at a pre-set constant speed. The valves are remotely operated, and the package includes fitting a control system to operate the valves.
Kits are delivered on a turnkey basis and include engine performance analysis, cabling and installation, all materials and their transport, service engineers to undertake the whole installation and commissioning, also emission measurement and certification. Normally, installation and commissioning can be completed during a port call. MP
Events
© 2026 Riviera Maritime Media Ltd.